Email: office@ascopumps.kz
Kazakhstan
API 675 Metering & Dosing Pumps
Hydra-Cell's MT8 and P series metering pumps are compact, economical pumps for high-performance measurements. When used in place of conventional metering pumps, MT8 and P series offer superior performance at lower costs and provide virtually pulsation-free linear flow.
Dosing pump technology has not changed much in recent years. As a result, conventional metering pumps have operational limitations and more serious consequences for financial costs. Hydra-Cell metering pumps are no ordinary metering pumps. Hydra-Cell metering pumps are manufactured in full compliance with API 675, thanks to their virtually flat linear flow, and the principle of diaphragm hydraulic balance, implemented by the KELL CELL plunger design, allows the pumps to operate in various abnormal situations (blocked inlet or outlet, etc.) without damage.
Taking advantage of state-of-the-art technology, Hydra-Cell's MT8 and P series metering pumps achieve high levels of accuracy, repeatability and linearity, while delivering precise and consistent flow rates. This revolution in metering uses the latest electronic flow control available to replace outdated, inaccurate stroke controls.
Hydra-Cell metering pumps of the MT8 and P series have the following characteristics:
- The Hydra-Cell pumps combine simple technical design with robust construction to ensure precise metering and dosing with virtually pulse-free flow.
- Thanks to the sealed pump chamber and hydraulically balanced diaphragm design, the pumps provide leak-free performance with low operating costs.
- The pumps are compact and economical, designed for high-performance dosing applications.
- Due to their simple design, Hydra-Cell® pumps successfully dispense crystallised liquids, operate in dry running mode, and are resistant to emergencies and human error.
- They are designed to be fully automated.
What are Hydra-Cell metering pumps?
Design features and advantages of Hydra-Cell dosing pumps
- Pumps are more precise. No manual stroke adjustment to cause inaccuracies, potential leakage and operator error
- Optimum accuracy. Full stroke - every stroke.
- Linear flow. Multiple diaphragms reduce pulsation and acceleration losses.
- A variety of flows and pressures. Same piston, flow path and diaphragm size.
- Compact. Significantly smaller footprint than metering pumps with comparable performance.
- High repeatability. The filling valve in the piston assembly ensures optimum oil flow on every stroke to ensure consistent accuracy.
- Easy maintenance. Simple, clean oil drain plug for oil changes.
- Less chance of air ingress. Larger ports than usual to eliminate common problems with gas flow measurement.
Flow Range: up to 2 808 l/min
Temperature: up to 121 °С
Pressure: up to 172 bar
Solids: 800 microns
Materials: bronze, cast iron, Hastelloy C, polypropylene, PVDF, stainless steel 316L
This equipment includes
Industry sectors
- Glue
- Petrochemical industry
- Building
- Pharmaceutical
- Confectionery
- Surface treatment
- Mining
- Chemical
- Fruit concentrates
- Heating, water supply and sewage
- Water treatment
- Pet food
- Offshore
- Gas terminal
- Beauty and personal care
- Paper
- Power generation
- Engineering
- Bakery
- Fertiliser
- Сleaning water
- Meat processing
- Research and development
- Detergents
- Brewing & beverages
- Emulsions
- Maritime
- Agriculture
- Food industry
- Oil and Gas
- Aviation
- Paint and surface coating
- Ceramics
- Oil refineries
- A-plants
- Paints and resins
Applications
- Mixing
- Discharge
- Measuring
- Dosing
- Filtration
Processed substance
- Concrete
- Low NPSH
- Refrigerants
- Hygienic liquids
- Redox
- Acids
- Aliminium oxid slurry
- Biological broths and slurries
- Separated oil processing
- Ferric chloride
- Clay
- Low viscosity liquids
- Adhesives
- Water hardness
- Bitumen
- Lake water
- Sensitive and viscous liquids
- Glycol
- Liquid CO2
- Corrosive dyes
- Thermal oil
- Lime
- Cooling water
- Alkalis
- Diesel fuel oil
- Solvents
- Cryogenic liquids
- Thixotropic fluids
- High viscosity fluids
- Vinegar
- Biodiesel
- Fertilisers
- Vegetable oils
- Crystalline slurry
- Toxic liquids
- High temperature oils
- Drinking water
- Lime milk
- Emulsions
- Synthetic fibers
- Latex
- Тoluene
- Viscose
- Dye pigments
- Epoxy paint
- Sulphuric acids
- Light fluids
- Thin liquids
- Water
- Foam protein
- Cereals
- Hydrochloric acid
- Abrasive liquids
- Soaps and detergents
- Ultra pure water
- Carbon fibers
- Surface water
- LPG
- Sauces
- Ammonia
- Seawater
- Paints
- Viscous liquids
- Process condensate
- Irrigation water
- Silver nitrate
- Acetate
- Non-Newtonian fluids
- Phosphoric acid
- Gels
- Radio active fluids
- Caustic solutions
- Sewage
Features
- Pulse-less
- Compact
- Rugged
- High system pressure
- Seal-less
Certificates
- ATEX
- CE
- DNV
- EAC
- ISO 9001
- ISO 14001
- DeliveryWe guarantee a prompt and reliable delivery of pumping equipment to any part of the country.
- InstallationWe guarantee a high quality installation work, which ensures optimal and safe operation of the pumping equipment.
- WarrantyWe provide an extended warranty period for all pumping equipment, which indicates its high quality and reliability.
Why us
7 reasons to buy Hydra-Cell metering and dosing pumps at ASCO PUMPS
- Efficiency - meets API 675 standards for linearity, repeatability and static accuracy.
- Precise - accurate in volume per stroke, almost independent of pressure.
- Cost-effective - virtually pulse-free flow, eliminating the need for pulsation dampeners.
- 100% leak-proof - seal-free design for leak-free operation.
- Reduced maintenance costs - can operate without damage for a long time.
- Easy to control - flow rate is directly proportional to the input shaft speed.
- Flexibility - handles abrasive and solid particles, high and low viscosity liquids, shear sensitive liquids, as well as non-lubricating and aggressive liquids.
Have a question? Ask
×
Progressive cavity pumps
Today, ASCO POMPE manufactures screw pumps that are used in a variety of industries, from wastewater treatment plants to the wine and food industry. Screw pumps are positive displacement pumps and are designed for pumping various types of liquids: viscous, abrasive, additive liquids, suspensions and dispersions. The valve-less design of the pump, the direct dependence of its performance on the engine speed, and the ability to change the direction of flow of the pumped liquid are undoubtedly the advantages of screw pumps.
more »×
Centrifugal pumps
Компанія Asco Pompe, відома на італійському ринку як лідер у виробництві насосів об'ємного типу дії, поступово розширила асортимент продукції, додавши до нього промислові відцентрові насоси. Відцентрові насоси є однією з найпоширеніших різновидів динамічних гідравлічних машин. Насоси, які пропонує компанія АСКО ПАМПС, широко застосовуються в системах водопостачання, водовідведення, в теплоенергетиці, в харчовій промисловості, в хімічній промисловості, в нафтохімічній галузі, в атомній промисловості, в авіаційній і ракетній техніці і ін.
more »×
Dosing pumps
Valisi dosing pumps for the energy, chemical, agricultural, food and other industries have proven to be reliable equipment in more than 30 countries around the world, solving the problems of dosing liquids at industrial facilities in all industries. The wide range of products offered by ASСO PUMPS, including dosing pumps with capacities from 1 to 3200 l/h, mixers, controllers and water quality sensors, allows us to meet the needs of wastewater treatment plants, drinking water treatment plants, industrial processes, food processing, landscaping and agriculture.
more »×
Lobe pumps
The lobe pumps are rotary vane pumps for universal use. The pumps are designed in such a way that their installation, dismantling and maintenance, including cleaning, preventive maintenance and repair, take a minimum of time and do not require special sophisticated equipment. The pumps are designed to prevent contamination of the pumped liquid. The combination of these properties ensures a long service life of the equipment. The pumps are CE & ISO 90001 certified.
more »
×
Vacuum pumps
На заводі ASCO POMPE виробляють наступний ряд вакуумних насосів: масляні пластинчато-роторні вакуумні насоси, сухі пластинчато-роторні вакуумні насоси, сухі гвинтові вакуумні насоси, водокільцеві вакуумні насоси, автоматичні вакуумні системи, інженерні рішення в області вакуумних систем. Завдяки великому досвіду роботи і співпраці з провідними європейськими постачальниками комплектуючих, підрозділ ASCO VACUUM випускає обладнання, що має найвищий клас якості, який гарантує надійну і тривалу роботу.
more »×
Peristaltic volumetric pumps
VALISI peristaltic pumps cover a range of twenty models and two series with capacities up to 150 m3/h and pressures up to 15 bar. This type of pump can be operated in dry running mode, is seal-free, reversible, self-priming and has a high suction capacity. Two rollers or two shoes alternately compress the tubing, which is available in twelve different elastomeric materials for the widest possible range of applications in a wide variety of industries. The pumps are designed for continuous, round-the-clock operation with viscous, abrasive, solids, transfer or dosing products.
more »×
Pneumatic diaphragm pumps
Air Operated Double Diaphragm Pumps are one of the most versatile pumps on the market today. They can be purchased at a favourable price and are used in many industries to pump a wide range of liquids.
Thanks to their simple operating principles, compact and reliable design, and a wide range of materials and accessories, diaphragm pumps meet all the requirements for industrial pumping equipment.
more »×
Internal gear pumps
Internal gear pumps are self-priming positive displacement pumps with a robust and simple design (only two moving parts). This type of design allows for efficient pumping of both liquid and clean media, as well as abrasive, highly viscous media with inclusions (e.g. asphalt, chocolate, honey, etc.). The pumps can pump liquids with a viscosity of 1 cSt to 450,000 cSt. The pumps provide a uniform flow and high pressure. The following gear pump designs are available: internal eccentric gear pumps, modular gear pump, helical gear pump etc.
more »×
Accessories
Пропонуємо вашій увазі різні аксесуари для пневматичних мембранних насосів. У нашому портфоліо представлені демпфери пульсацій: Tranquilizers® - демпфери пульсацій компанії Sandpiper; пластикові і металеві демпери пульсацій виробництва Dellmeco. Також ми пропонуємо систему розподілу стисненого повітря ESADS +.
more »IF YOU DON'T FIND THE RIGHT OPTION, DON'T HESITATE TO CALL US.
WE WILL HELP YOU TO FIND THE RIGHT EQUIPMENT.
QUICK PRICE CALCULATION FOR INDUSTRIAL EQUIPMENT IN 2 STEPS
×
