Pumps for High-Volume

High-volume pumps are specialised equipment designed to pump large volumes of liquid or gas efficiently and energy-effectively. They play an important role in a variety of industries that require the handling and transport of large flows of media, such as the oil and gas industry, water and wastewater, chemical and food processing, construction, and others. These pumps have high performance, which allows them to effectively cope with the tasks of pumping large volumes of liquid or gas in a short period of time. They come in a variety of designs and drive types, depending on the specifics of the application, including centrifugal, screw, piston and other types of pumps. The selection of the optimal pump for high volume applications depends on the specific needs of the process, such as the required flow rate, pressure, type of medium to be pumped and operating conditions. Reliability, efficiency and high performance make high volume pumps an integral part of the infrastructure of many industrial and utility systems, ensuring efficient operation and optimisation of production processes.

TOP-21 Pumps for high-volume + other products

ANSI UC Sealless Pumps

ANSI UC Sealless Pumps

Designed for use in the most extreme chemical processing applications, the ULTRAChem® series pumps are magnetically driven pumps that meet ANSI standards. The pumps are designed for pumping aggressive, chemically active liquids. The concentration of suspended solids should not exceed 1.25 mg/cubic cm. The pumps are ideal for operation at ultra-low ambient temperatures.

Flow Range:up to 329 m3/h
Viscosity:over 200 cP
Temperature:+121 °С
Pressure:to 20 bar
Single stage liquid ring vacuum pumps AVM & AVL

Single stage liquid ring vacuum pumps AVM & AVL

The AVM and AVL series consist of single-stage liquid ring vacuum pumps designed to achieve deep vacuum. Both series have the same hydraulics but different designs.

Flow Range:up to 470 m3/h
Temperature:max. gas temperature: 120°C; max. liquid temperature: 50°C
Pressure:up to 2 bar
Materials:casr iron, stainless steel
Vacuum:up to 33 mbar
Industrial Progressive Cavity Pump

Industrial Progressive Cavity Pump

The pumps are used in various enterprises, industries, in the most difficult operating conditions, ensuring smooth fluid transfer. The pumps are suitable for pumping liquids with low and high viscosity, as well as for pumping abrasive, sticky, crushing and foaming liquids. The pumps are particularly suited for handling products with solid particles. The suction capacity is max. 5m/s. The pumps deliver regular, linear, pulsation-free and measured flow. Quiet operation without vibration.

Flow Range:max. 500 m3/h
Viscosity:up to 3,000,000 St
Temperature:max. +150 °C
Pressure:max. 48 bar
Solids:presence of particles up to 7%
Materials:cast iron, cast steel, stainless steel
Hopper pumps

Hopper pumps

The design of the pumps allows them to be used for many different applications. The standard design includes an enlarged rectangular inlet hopper with a screw conveyor that pushes the product to be pumped into the pump's working section. There are versions in which the pump inlet is equipped with a large screw, an integrated cork breaker or both. Most pumps are supplied in a monoblock design (direct connection of the pump to the electric motor) or with a free shaft outlet (without an electric motor).

Flow Range:up to 200 m3/h
Viscosity:up to 3.000.000 cSt
Pressure:up to 36 bar
Solids:presence of particles up to 40%
Materials:steel, cast stainless steel
Valisi dosing pumps VD-EMP

Valisi dosing pumps VD-EMP

Electric metering pumps (piston and diaphragm) are designed for maximum operating ranges. Diaphragm and piston dosing pumps are specially designed for dosing all types of chemicals, whether corrosive, toxic or highly viscous, for water treatment, industrial processes, petrochemicals and agriculture. The main advantage of the pumps is the ability to connect up to four working heads to one motor, and these units can simultaneously pump different types of liquids with different capacities. The pumps themselves are made of high-quality materials, have a robust design and are maintenance-free.

Flow Range:from 2.5 to 600 l/h for piston and from 5 to 300 l/h for diaphragm
Temperature:Environment: 0 ... 45 ºC; product: PP: 0 ... 50 °C PVDF: -10 ... 50 °C SS: -10 ... 60 °C
Pressure:max. 20 bar
Materials:PP, PVDF, PTFE, SS AISI 316
Valisi dosing pumps VD-EСА

Valisi dosing pumps VD-EСА

The Valisi VD-ECA series are diaphragm and piston metering pumps with advanced metering control for precise and automatic control. The pumps are designed to accommodate a variety of remote control options such as SCADA, etc.

Flow Range:from 3 to 1200 l/h for piston and from 5 to 1800 l/h for diaphragm
Temperature:Environment: 0 ... 45 ºC; product: PP: 0 ... 50 °C PVDF: -10 ... 50 °C SS: -10 ... 60 °C
Pressure:max. 20 bar
Materials:Head materials: PP, PVDF, stainless steel
Horizontal centrifugal pumps

Horizontal centrifugal pumps

Idrochemical NCM centrifugal pumps comply with the dimensional criteria of ISO 2858 and ISO 5199. The casing and impeller profiles are designed to achieve high hydraulic efficiency and low NPSH.

The NCM line is available in five bearing housing sizes with wide interchangeability of parts, which allows for low maintenance spares.

Flow Range:up to 1500 m3/h
Temperature:-80°C to 350°C
Pressure:to 25 bar
Dimensions:Discharge size from 20 mm (¾ in) to 300 mm (12 in)
Head:up to 140 m
Vertical centrifugal pumps

Vertical centrifugal pumps

You can buy centrifugal vertical single-stage pumps of the NCV series from ASCO PUMPS Kazakhstan. The maximum shaft length is 5 m. The standard design is designed for rotational speeds up to 2900 rpm. The radial bearings are lubricated by the pumped liquid, provided it does not contain any suspended abrasive particles. If the pumped fluid is slightly abrasive, the radial bearings are lubricated with an external special transparent grease.

Flow Range:to 2500 m3/h
Temperature:-80°C to +350°C
Pressure:to 16 bar
Materials:cast iron, steel, carbon steel, stainless steel, nickel, Hastelloy, titanium, bronze
Dimensions:Discharge size from 20 mm to 300 mm
Length:up to 1500 mm
In-line centrifugal pumps

In-line centrifugal pumps

Сlose coupled industrial pumps of the NCL series - IN LINE design - are units designed to support technological processes involving the pumping of hazardous liquids. The main field of application of such equipment is the petrochemical and chemical industries. The pumps are indispensable for solving such tasks as pumping acids, caustics, chlorine alkaline solutions, chemical fibers, polymers, volatile organic compounds, sludge pumping and waste treatment. The pumps are CE-marked and comply with applicable European directives such as ATEX.

Flow Range:to 1500 m3/h
Temperature:-80 °C to 350 °C
Pressure:to 25 bar
Materials:cast iron, steel, carbon steel, stainless steel, corrosion-resistant alloys
Dimensions:Discharge size from 20 mm to 300 mm
Head:to 140 m
Hose pumps N series

Hose pumps N series

Peristaltic pumps of the N series (roller design) are self-priming peristaltic pumps with a seal-free design. The liquids are transported inside the hose and do not come into contact with any metal parts of the pump.

The pumps are characterised by extremely smooth pumping of the product, thus preventing the formation of emulsions or turbulence. All pumps can be supplied in monoblock versions connected to gearboxes, regulators, electric, diesel, pneumatic or hydraulic motors.

Flow Range:max. 60 m3/h
Viscosity:150.000 cps
Temperature:max. 100 °C
Pressure:max. 7 bar
Solids:max. permissible content - 60% up to 60 mm
Materials:aluminium
Hose pumps VPH series

Hose pumps VPH series

The VPH series of peristaltic pumps with shoe technology is our updated peristaltic pump designed for high pressure applications up to 15 bar, with 14 sizes available in flow rates up to 150 m3/h. This is a heavy-duty industrial pump series designed for round-the-clock operation. We have combined the best available materials with clever design solutions to maximise uptime and minimise maintenance.
This pump summarises what we want to achieve: the best pumping solutions for our customers. Our design increases the simplicity and reliability of the pump.

Flow Range:max. 150 m3/h
Viscosity:1.000.000 cP
Temperature:max. 90 °C
Pressure:max. 15 bar
Solids:up to 60 mm
Materials:cast iron
Dimensions:hose diameter: ¼'' ÷ 5''
Internal eccentric gear pump

Internal eccentric gear pump

VALISI internal gear pumps of the VD series are positive displacement pumps with a robust and simple design (only two moving parts). This type of design allows for efficient pumping of both liquid and clean media, as well as highly viscous abrasive media with inclusions (e.g. asphalt, chocolate, honey, etc.). The pumps can pump liquids with a viscosity of 100 ~ 1.000.000 cst. The pumps provide a uniform flow and high pressure. The following gear pump designs are available: without axial support, with axial support, in-line design, monoblock design, and high-speed design.

Flow Range:max 250 m3/h
Viscosity:max 1.000.000 cst
Temperature:-40 ~ 300 ºC
Pressure:max 15 Bar
Materials:Pig Cast Iron, Spheroidal Cast ıron, Cast Steel, AISI 304/316 CrNi Stainless Steel
General industrial gear pumps

General industrial gear pumps

General purpose pumps are widely used in all areas of industrial production around the world due to their gentle handling of the fluid during pumping, as well as their simple and robust design and minimal maintenance. Thanks to the standard connection dimensions, the pumps can be combined with any motor and other drive elements that comply with NEMA or IEC standards.

Flow Range:102 m3/h
Viscosity:440 000 cSt
Temperature:-50 +230 °C
Pressure:17 bar
Materials:cast iron, stainless steel
Heavy-duty gear pumps

Heavy-duty gear pumps

Heavy-duty gear pumps solve the toughest applications and ensure maximum flow rates when emptying large tanks. The foot-mounted design of the pump allows the use of various types of mechanical seals without changing the design of the pump itself (Universal Seal series). A large bearing cup located at the rear of the pump allows the installation of any seal, from a conventional stuffing box to a double mechanical seal.

Flow Range:to 364 m³/h
Viscosity:to 440,000 cSt
Temperature:-85°C to +430°C
Pressure:14 bar
Materials:cast iron, steel, stainless steel, Alloy C, Alloy 20 and Others, Hard Materials and Coatings
Valisi lobe pumps

Valisi lobe pumps

Rotary Lobe Pumps are reliable and efficient solutions for pumping liquids in a wide range of industries that require reliable and wear-resistant technology.

Rotary Lobe Pumps are reliable thanks to its hygiene design, capable of pumping without damaging liquid’s structure, and depending on liquid’s viscosity, Rotary Lobe Pumps have the ability of generating pressure up to 12 Bar.

Flow Range:400 m³/h
Viscosity:250.000 SSU
Temperature:150 ºC
Pressure:10 Bar
Materials:cast iron
WAUKESHA lobe pumps

WAUKESHA lobe pumps

Waukesha lobe pumps are represented by two main series: Universal I and Universal II. They differ in operating pressure and some design features. The former operates at a pressure of 13.8 bar, and the latter at 34.5 bar. The Universal II models are equipped with a three-pin stationary seal. The pumps used in the food and pharmaceutical industries meet all hygiene and safety standards. For pharmaceutical equipment, a smooth internal surface is mandatory. For both series of pumps, all parts and structures can be rinsed.

Flow Range:up to 160 m3/h
Viscosity:max 500.000 cPs
Temperature:-40 ÷ 150°C
Pressure:up to 34,5 bar
Materials:316 stainless steel, 316L optional
Single stage liquid ring vacuum pumps AVA

Single stage liquid ring vacuum pumps AVA

The AVA series pumps are designed and manufactured for use in the most critical applications, their main feature being that they are suitable for suction of contaminated gas mixtures, corrosive gases and vapours, explosive gases and vapours of any nature up to normal end vacuum, providing a maximum vacuum of up to 180 mbar. They are manufactured to the highest quality standards.

Flow Range:up to 1950 m3/h
Materials:cast iron, stainless steel
Vacuum:up to 33 mbar abs
Two-stage liquid ring vacuum pumps of the AVD series

Two-stage liquid ring vacuum pumps of the AVD series

Two-stage vacuum pumps of the AVD-AVDL series are capable of creating a maximum residual pressure of up to 33 mbar. They are in demand in cases where it is necessary to pump out various moisture in the form of steam or liquids in sufficiently large quantities. The reliability of the products is beyond doubt, they are easy to maintain, and they can be used to pump out any gas or vapour. Materials used for manufacturing range from high-quality, particularly resistant cast iron to stainless steel of the highest grades, for example, AISI 316.

Flow Range:up to 1800 m3/h
Temperature:max. gas temperature: 100°С
Pressure:up to 5 bar
Materials:stainless steel, cast iron
Vacuum:up to 33 mbar
Oil rotary vane vacuum pumps AVPL

Oil rotary vane vacuum pumps AVPL

The AVPL oil rotary lobe pumps are extremely compact thanks to their integrated motor and transmission, making them the ideal choice for compact installations. They are equipped with extremely robust blades that ensure a long service life. Specially designed oil filters ensure excellent oil separation, removing even the smallest oil droplets from the exhaust air.

Flow Range:up to 365 m³/h
Materials:cast iron, stainless steel, steel, bronze
Vacuum:2 mbar or up to 0,1 mbar
Dry-operated rotary vane vacuum pumps AVPS

Dry-operated rotary vane vacuum pumps AVPS

Dry operated rotary vane pumps designed to operate without any lubrication. They require minimum maintenance, which can be carried out easily thanks to the direct access to the vanes. They can be used as vacuum pumps, as compressors, or to produce vacuum and pressure simultaneously.

Flow Range:up to 45 m3/h
Materials:cast iron, stainless steel, steel, bronze
Vacuum:up to 150 mbar
Multihead PR Plunger Pumps

Multihead PR Plunger Pumps

The PR series presents triplex, quadruplex and quintuplex configurations for high pressure process applications, providing a compact and efficient solution for offshore applications. Its crank mechanism has an innovative design that allows multiple rams to be housed in a compact frame, ideal for space constraints.

Flow Range:up to 100000 l/h
Pressure:up to 1000 bar
Dimensions:power: up to 150 kW
Length:stroke: up to 25 mm

High Volume Pumps

High Volume Pumps: An Overview

High volume pumps are specialized equipment designed to efficiently pump large volumes of liquid or gas. They play an important role in various industries and engineering sectors where large volumes of media need to be handled, such as the oil and gas industry, water supply and sewage, chemical and food industries, construction and others.

Advantages of high-volume industrial pumps

  • High performance: high-volume industrial pumps have high performance, which allows them to efficiently pump large volumes of liquid or gas in a short period of time;
  • Reliability and durability: they are made of high-quality materials and have a robust design, which ensures their reliable and long-lasting operation;
  • Variety of designs and types: high-volume industrial pumps are available in various design options and drive types, allowing you to choose the optimal solution for specific tasks and operating conditions;
  • Efficiency and resource saving: they contribute to optimizing production processes and saving energy resources due to its high productivity and efficiency.

Industrial pumps for high volume

Selecting a Pump for High Volume

When selecting a pump for high volume operation, there are a number of key factors to consider:

  • Required Capacity and Pressure: You need to determine the required capacity and pressure of the pump according to your production needs;
  • Type of pumped medium: The pump selection should match the type of liquid or gas that will be pumped;
  • Operating conditions: Consider operating conditions such as temperature, aggressive media, and other factors;
  • Budget constraints: The cost of the pump and its operating costs are also important factors when selecting equipment.

By selecting the right pump for high volume operation, you can ensure the efficient and reliable operation of your production and optimize production processes.

Search

To search for the required pump, select from 1 to 5 parameters

All 41 options
All 54 options
All 88 options
All 50 options
All 29 options

IF YOU DON'T FIND THE RIGHT OPTION, DON'T HESITATE TO CALL US.
WE WILL HELP YOU TO FIND THE RIGHT EQUIPMENT.

quick searchDownload cataloguePrice request
QUICK PRICE CALCULATION FOR INDUSTRIAL EQUIPMENT IN 2 STEPS
STEP 1 of 2 – ENTER THE DATA IN THE FORM BELOW:

Select a category:

Additional information:


STEP 2 of 2 – Specify the period of time during which you want to receive an accurate estimate for your request:

×
To top